单选

Topic 1 Question #1What is the difference between a RIB and a FIB?

单选

Topic 1 Question #2Which QoS component alters a packet to change the way that traffic is treated in the network?

简答

Topic 1 Question #3DRAG DROP -Drag and drop the descriptions from the left onto the correct QoS components on the right.Select and Place:

单选

Topic 1 Question #4Which statement about Cisco Express Forwarding is true?

单选

Topic 1 Question #5What is a  benefit  of deploying an on-premises infrastructure versus a cloud infrastructure deployment?

简答

Topic 1 Question #6DRAG DROP -Drag and drop the characteristics from the left onto the appropriate infrastructure deployment types on the right.Select and Place:

单选

Topic 1 Question #7How does QoS traffic shaping alleviate network congestion?

多选

Topic 1 Question #8An engineer is describing QoS to a client.Which two facts apply to traffic policing? (Choose two.)

单选

Topic 1 Question #9Which component handles the orchestration plane of the Cisco SD-WAN?

多选

Topic 1 Question #10What are two device roles in Cisco SD-Access fabric? (Choose two.)

单选

Topic 1 Question #11What is the role of the vSmart controller in a Cisco SD-WAN environment?

单选

Topic 1 Question #12When a wired client connects to an edge switch in a Cisco SD-Access fabric, which component decides whether the client has access to thenetwork?

单选

Topic 1 Question #13Which benefit is offered by a cloud infrastructure deployment but is lacking in an on-premises deployment?

单选

Topic 1 Question #14Which action is the vSmart controller responsible for in a Cisco SD-WAN deployment?

单选

Topic 1 Question #15Where is radio resource management performed in a Cisco SD-Access wireless solution?

简答

Topic 1 Question #16DRAG DROP -Drag and drop the characteristics from the left onto the infrastructure types on the right.Select and Place:

单选

Topic 1 Question #17How does the RIB differ from the FIB?

单选

Topic 1 Question #18Which technology is used to provide Layer 2 and Layer 3 logical networks in the Cisco SD-Access architecture?

单选

Topic 1 Question #19What is the difference between CEF and process switching?

多选

Topic 1 Question #20What are two considerations when using SSO as a network redundancy feature? (Choose two.)

简答

Topic 1 Question #21DRAG DROP -Drag and drop the characteristics from the left onto the correct infrastructure deployment type on the right.Select and Place:

单选

Topic 1 Question #22In a Cisco SD-Access fabric, which control plane protocol is used for mapping and resolving endpoints?

多选

Topic 1 Question #23What are two differences between the RIB and the FIB? (Choose two.)

多选

Topic 1 Question #24Which two network problems indicate a need to implement QoS in a campus network? (Choose two.)

单选

Topic 1 Question #25In a Cisco SD-Access wireless architecture, which device manages endpoint ID to edge node bindings?

简答

Topic 1 Question #26DRAG DROP -Drag and drop the QoS mechanisms from the left onto their descriptions on the right.Select and Place:

单选

Topic 1 Question #27Which control plane protocol is used between Cisco SD-WAN routers and vSmart controllers?

单选

Topic 1 Question #28In a three-tier hierarchical campus network design, which action is a design best-practice for the core layer?

单选

Topic 1 Question #29What is a VPN in a Cisco SD-WAN deployment?

单选

Topic 1 Question #30Which function does a fabric edge node perform in an SD-Access deployment?

单选

Topic 1 Question #31What is the role of a fusion router in an SD-Access solution?

单选

Topic 1 Question #32Which action is the vSmart controller responsible for in an SD-WAN deployment?

单选

Topic 1 Question #33What is one fact about Cisco SD-Access wireless network deployments?

单选

Topic 1 Question #34In a Cisco SD-Access solution, what is the role of a fabric edge node?

多选

Topic 1 Question #35What are two reasons a company would choose a cloud deployment over an on-prem deployment? (Choose two.)

单选

Topic 1 Question #36What is the difference between the MAC address table and TCAM?

单选

Topic 1 Question #37Which controller is the single plane of management for Cisco SD-WAN?

单选

Topic 1 Question #38A company plans to implement intent-based networking in its campus infrastructure.Which design facilitates a migration from a traditional campus design to a programmable fabric design?

单选

Topic 1 Question #39Which statement about a fabric access point is true?

单选

Topic 1 Question #40A customer requests a network design that supports these requirements:✑ FHRP redundancy✑ multivendor router environment✑ IPv4 and IPv6 hostsWhich protocol does the design include?

单选

Topic 1 Question #41While configuring an IOS router for HSRP with a virtual IP of 10.1.1.1, an engineer sees this log message.Jan 1 12:12:12.111 : %HSRP-4-DIFFVIP1: GigabitEthernet0/0 Grp 1 active routers virtual IP address 10.1.1.1 is different to the locallycon¬gured address 10.1.1.25Which configuration change must the engineer make?

多选

Topic 1 Question #42A network administrator has designed a network with two multilayer switches on the distribution layer, which act as default gateways for theend hosts. Which two technologies allow every end host in a VLAN to use both gateways? (Choose two.)

单选

Topic 1 Question #43Refer to the exhibit. On which interfaces should VRRP commands be applied to provide first hop redundancy to PC-01 and PC-02?

单选

Topic 1 Question #44Under which network conditions is an outbound QoS policy that is applied on a router WAN interface most beneficial?

单选

Topic 1 Question #45An engineer must configure HSRP group 300 on a Cisco IOS router. When the router is functional, it must be the active HSRP router. The peerrouter has been configured using the default priority value. Which command set is required?

单选

Topic 1 Question #46What is the function of a fabric border node in a Cisco SD-Access environment?

单选

Topic 1 Question #47In a wireless Cisco SD-Access deployment, which roaming method is used when a user moves from one AP to another on a different accessswitch using a singleWLC?

单选

Topic 1 Question #48What is the recommended MTU size for a Cisco SD-Access Fabric?

单选

Topic 1 Question #49What is the function of the fabric control plane node in a Cisco SD-Access deployment?

单选

Topic 1 Question #50What is the data policy in a Cisco SD-WAN deployment?

单选

Topic 1 Question #51In Cisco SD-WAN, which protocol is used to measure link quality?

单选

Topic 1 Question #52What is used to perform QoS packet classification?

单选

Topic 1 Question #53How do cloud deployments differ from on-premises deployments?

单选

Topic 1 Question #54Which controller is capable of acting as a STUN server during the onboarding process of Edge devices?

单选

Topic 1 Question #55How is 802.11 traffic handled in a fabric-enabled SSID?

单选

Topic 1 Question #56Refer to the exhibit.An engineer is installing a new pair of routers in a redundant configuration. When checking on the standby status of each router, the engineernotices that the routers are not functioning as expected.Which action will resolve the configuration error?

单选

Topic 1 Question #57Refer to the exhibit.Router1 is currently operating as the HSRP primary with a priority of 110. Router1 fails and Router2 takes over the forwarding role. Whichcommand on Router1 causes it to take over the forwarding role when it returns to service?

单选

Topic 1 Question #58An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172 16.50.5/24. The engineer must register 50 newCisco AIR-CAP2802IE-K9 access points to the WLC using DHCP option 43. The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24subnet. The engineer has con¬gured the DHCP scope on the switch as follows:Network 172.16.100.0 255.255.255.0Default Router 172.16.100.1 -Option 43 ASCII 172.16.50.5 -The access points are failing to join the wireless LAN controller. Which action resolves the issue?

单选

Topic 1 Question #59What is the role of vSmart in a Cisco SD-WAN environment?

单选

Topic 1 Question #60Which action is performed by Link Management Protocol in a Cisco StackWise Virtual domain?

多选

Topic 1 Question #61What are two reasons why broadcast radiation is caused in the virtual machine environment? (Choose two.)

多选

Topic 1 Question #62Which two GRE features are configured to prevent fragmentation? (Choose two.)

单选

Topic 1 Question #63Which LISP device is responsible for publishing EID-to-RLOC mappings for a site?

单选

Topic 1 Question #64Refer to the exhibit.Assuming that R1 is a CE router, which VRF is assigned to Gi0/0 on R1?

多选

Topic 1 Question #65What are two benefits of virtualizing the server with the use of VMs in a data center environment? (Choose two.)

单选

Topic 1 Question #66Which statement about route targets is true when using VRF-Lite?

单选

Topic 1 Question #67Which LISP infrastructure device provides connectivity between non-LISP sites and LISP sites by receiving non-LISP traffic with a LISP sitedestination?

单选

Topic 1 Question #68Which statement explains why Type 1 hypervisor is considered more efficient than Type2 hypervisor?

单选

Topic 1 Question #69Which statement about VXLAN is true?

单选

Topic 1 Question #70Which TCP setting is tuned to minimize the risk of fragmentation on a GRE/IP tunnel?

单选

Topic 1 Question #71Which statement describes the IP and MAC allocation requirements for virtual machines on Type 1 hypervisors?

多选

Topic 1 Question #72Which two namespaces does the LISP network architecture and protocol use? (Choose two.)

多选

Topic 1 Question #73Which two entities are Type 1 hypervisors? (Choose two.)

简答

Topic 1 Question #74DRAG DROP -Drag and drop the LISP components from the left onto the functions they perform on the right. Not all options are used.Select and Place:

单选

Topic 1 Question #75Which action is a function of VTEP in VXLAN?

多选

Topic 1 Question #76Which two actions provide controlled Layer 2 network connectivity between virtual machines running on the same hypervisor? (Choose two.)

单选

Topic 1 Question #77What is a Type 1 hypervisor?

单选

Topic 1 Question #78Refer to the exhibit. A network engineer configures a GRE tunnel and enters the show interface tunnel command. What does the outputconfirm about the configuration?

单选

Topic 1 Question #79What it the purpose of the LISP routing and addressing architecture?

单选

Topic 1 Question #80What function does VXLAN perform in a Cisco SD-Access deployment?

单选

Topic 1 Question #81Refer to the exhibit.MTU has been configured on the underlying physical topology, and no MTU command has been configured on the tunnel interfaces.What happens when a 1500-byte IPv4 packet traverses the GRE tunnel from host X to host Y, assuming the DF bit is cleared?

单选

Topic 1 Question #82Which entity is responsible for maintaining Layer 2 isolation between segments in a VXLAN environment?

单选

Topic 1 Question #83What is an emulated machine that has dedicated compute, memory, and storage resources and a fully installed operating system?

简答

Topic 1 Question #84DRAG DROP -Drag and drop the descriptions of the VSS technology from the left to the right. Not all options are used.Select and Place:

单选

Topic 1 Question #85Which technology does VXLAN use to provide segmentation for Layer 2 and Layer 3 traffic?

多选

Topic 1 Question #86Refer to the exhibit. An engineer must assign an IP address of 192.168.1.1/24 to the GigabitEthernet1 interface. Which two commands mustbe added to the existing configuration to accomplish this task? (Choose two.)

单选

Topic 1 Question #87The following system log message is presented after a network administrator configures a GRE tunnel:%TUN-RECURDOWN Interface Tunnel 0 temporarily disabled due to recursive routingWhy is Tunnel 0 disabled?

单选

Topic 1 Question #88What is a benefit of using a Type 2 hypervisor instead of a Type 1 hypervisor?

多选

Topic 1 Question #89Refer to the exhibit. A network engineer must simplify the IPsec configuration by enabling IPsec over GRE using IPsec profiles. Which two configuration changes accomplish this? (Choose two).

单选

Topic 1 Question #90What is a benefit of a virtual machine when compared with a physical server?

单选

Topic 1 Question #91What is required for a virtual machine to run?

单选

Topic 1 Question #92Which entity is a Type 1 hypervisor?

多选

Topic 1 Question #93What are two benefits of virtual switching when compared to hardware switching? (Choose two.)

单选

Topic 1 Question #94What is a characteristic of a virtual machine?

单选

Topic 1 Question #95Which LISP component is required for a LISP site to communicate with a non-LISP site?

多选

Topic 1 Question #96Which two components are supported by LISP? (Choose two.)

单选

Topic 1 Question #97What is the function of a VTEP in VXLAN?

单选

Topic 1 Question #98Refer to the exhibit. Which configuration must be applied to R1 to enable R1 to reach the server at 172.16.0.1?

单选

Topic 1 Question #99Refer to the exhibit. Which configuration allows Customer2 hosts to access the FTP server of Customer1 that has the IP address of192.168.1.200?

单选

Topic 1 Question #100Refer to the exhibit. A network engineer configures a new GRE tunnel and enters the show run command. What does the output verify?